Single coat on damage pond make you satisfied

As seen in Water Garden News and Pond Trade Magazine! Are you having difficulty finding that leak? Water levels keep dropping? With a 25 year history of success our liquid EPDM pond product; PondPro is your answer. No Primer One Coat and an unconditional 5 year warranty! Pondpro is a liquid version of EPDM very similar to EPDM pond liners sold in pond supply stores. It is a 100% liquid EPDM and 100% compatible to your EPDM pond liners sold in pond supply stores. It works extremely well on all non-porous concrete fountains as well as EPDM Fish Ponds liners. For any deep Pond/Pool or Fountain that sits on grade or below that is constructed out of porous material ( this includes concrete, block, wood etc ) must be first primed with the Proflex Primer you can find on our order form. Then it is safe to coat with PondPro. Concrete block should be parged (stuckoed) to make it easier to seal with the PROFLEX. If you put the Pondpro on without the primer it will always fail and the only remedial solution then is sandblast removal and that is a costly and messy procedure. Reflecting pools are another good application for EPDM. These are demanding applications where the unique properties of EPDM have a distinct advantage over other products. To give you an idea of just how durable of a product Pondpro 2000 take a look at a few of its characteristics:

o Pondpro will withstand temperatures from -62 to 350F
o One Coat application. No Primer is needed
o Easy Application- A true do-it-yourself product
o Waterproofs immediately upon application.
o It has proven itself superior to Acrylics, Urethanes and other elastomers for up to 3 times longer

The success of Pondpro 2000 is through combining ethylene and propylene with a diene monomer. Pondpro 2000 is safe for fish and plant life as well as chlorinated water. This polymer (when cross linked) is an excellent moisture barrier, resistant to oxidation and UV degradation but its most important property is its ability to tolerate both low as well as high temperatures (from minus 62 to plus 350 degrees Fahrenheit).
So what surfaces can PondPro be applied to?

PondPro can be applied to the following surfaces

o Metal – Coated or Galvanized Steel Weathered Aluminum
o Weathered Copper
o EPDM Rubber membrane
o Concrete (except foot traffic surfaces)
o Urethane Foam
o Primed Wood
o Fiberglass
o PVC Sheet and Pipe
o Acrylic Sheet
o Sponge Rubber insulation
o EPDM Rubber Membrane on flat or sloped Roofs
o Weathered Steel Siding
o Weathered Fiberglass
o Weathered standing seam and corrugated metal roofs
o Weathered Vinyl, PVC and Polycarbonate plastic
o Foam insulation for pipe
o Cast Concrete foundations