The Benefits of a Rubber Pond Coating

Manmade ponds come in all shapes and sizes, but, no matter which version you go with, the result can be a more impressive and enjoyable commercial or private property.

Whatever you have in mind for your pond, it needs to involve a coating, or leaks will eventually occur and you’ll have a lot of work on your hands – costly, labor-intensive work, at that.

Below, we’re going to detail why a Rubber Pond Coating is the type you should choose for this important task.


Using a Rubber Pond Coating Instead of a Liner

Many people simply use liners for their ponds. They come prefabricated, so it’s easy enough to dig a hole for it, put it in the ground and then pour the water.

The obvious problem is that liners don’t give you much flexibility where your pond’s shape is concerned. Obviously, you are limited to the types of liners available.

However, they’re also not as durable as a coating. Fortunately, coatings are just as easy to apply despite the fact that they give you more options for the shape of your pond.

Rubber Coatings Are Extremely Affordable

Another benefit is how affordable you’ll find a high-quality rubber pond coating. They’re sold at most home improvement stores, too, so you shouldn’t have any trouble finding them in your area, either.

They Work with Just About Any Material

A lot of people use concrete for their manmade ponds, but other options exist, as well. Whichever you choose, you’ll find that a rubber pond coating is able to adhere to the material and do its job.

Safe for Plants and Fish

Furthermore, you may wish to grow plants in your pond (they’re great for looks and keeping the water clean) and/or add fish. The nice thing about using a rubber coating for your pond is that it’s nontoxic. Even if you have no plans for plants or fish, you don’t want local wildlife turning up dead in the water because of toxicity.

Easy to Apply

Installing your own manmade pond isn’t very difficult. You basically dig a hole, pour concrete, add sealant and then your coating. Obviously, it depends on how large the pond is going to be, but the point is that adding a coating is extremely simple to do.
It’s just like painting a wall. You can use a paint roller and brushes to coat the entire surface of your pond and you’ll find it dries relatively quickly. Just make sure you wear a paper mask and put on some gloves before doing so as you don’t want to get any on your skin or breathe in the fumes.

Although there are a number of different ways you can seal in the water in your pond, it’s hard to argue there’s a better way than using the rubber coating we described here. Aside from its affordability, you’ll find that applying a rubber pond coating couldn’t be easier. It will also grant you as much flexibility as you need to create the exact shape you want for your pond.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *