Tips for Applying Pond Liner Sealant

Many people who are creating a pond for their backyard choose to use a pond liner to help keep the water in place. This can be a great solution for many types of pond in the backyard, but you want to make sure that they are put in place properly, and that you have the right sealant to reduce the risk of leaks. After all, you do not want all the water to slowly leak from your pond into the surrounding soil. This is especially true if you have plants or fish living in the pond.

Looking for Leaks in a New Pond

Once you have the liner in place, you will want to add water. Fill up the water about six inches at a time and then wait and watch the level of the water. If the water does not go down over a period of a few hours, there is no leak at that level of the pond. Add more water and repeat this process. When the water does start to recede, it gives you a much better idea of where the leak might be coming from.

The Right Pond Liner Sealant

While there are many sealants on the market today, you must make sure you are choosing the right sealant for your pond. Choose a pond liner sealant, as not just any sealant will do. While some sealants might claim to be waterproof, they are not subject to constant submersion in water. A true pond liner sealant will be capable of holding, even though it will be under the water all the time. You need to choose a sealant that is capable of lasting a long time

Non-toxic Is an Essential for a Pond Liner Sealant

One of the other factors you have to consider when you are choosing your sealant is toxicity. Always find and use those that are non-toxic. This is especially true for those who want to have fish and plants in their pond. However, even if you do not plan to add living things to your pond, there is always the possibility of birds, squirrels, and even pets getting drinks from the pond. If you are using a toxic pond liner sealant, it could make them ill or even kill them.

Sealing the Leak

After you have found the source of the leak, see how large it is. In most cases, it will be relatively small, and your pond liner sealant can take care of the job of fixing the hole or small tear. Clean the area and then apply the sealant according to the manufacturer’s instructions. Let it dry thoroughly and then add water to the pond. Wait and see if it is still leaking. Repeat the process to make sure you have found all of the leaks.

The right pond liner sealant can help you take care of leaks and negate the need to get an all new liner for your pond. Make sure you always have some of the sealant on hand.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *