Using Concrete Pond Sealer the Right Way

If you plan to use concrete pond sealer for your fish pond because you have some leaks or other issues, then you might want to take care of it on your own rather than bringing in a professional. When you take the DIY approach, you have the potential to save a substantial amount of money, even though you will be investing your time and energy. If you do choose to seal the pond on your own though, you have to be careful so you don’t make any mistakes that could cause issues for you later.

The Right Sealer

The first thing you need to do when you are preparing to seal your pond is to choose your concrete pond sealer. The sealer needs to be high quality, and it needs to have clear and concise instructions, which you will need to follow exactly if you hope to seal your pond correctly.

When it comes time to choose your concrete pond sealer, you do not want to choose the first brand that you find. Instead, take the time to see what other people have to say about it who have actually used. If you are working as a professional in the field, then you probably already have your own idea of which of the sealers will work the best for your needs. As long as it works well, you can stick with what you know.

Let New Concrete Dry

While you are probably excited to get the pond set up, or repaired, so you can refill it and add the fish, you do need to go slowly. It is very important that you wait until the new concrete has properly dried and cured before you hydrate and apply the sealer. Most experts believe that you should wait for at least 28 days.

Of course, this can be difficult for many people. You’ve already waited so long to get the repair done, or to pour the concrete for the creation of the pond. Still, it takes time for concrete to hydrate properly, and you do not want to use the concrete pond sealer too soon, as it will only serve to keep moisture in the concrete, and this can lead to cracking down the line.

One option that you might want to consider so you can speed up the process a bit is an accelerator. You can add this to the concrete when you are mixing it, and it should cut the entire process of curing down to about seven days or so.

Days to Avoid Applying Sealer

Not only do you need to wait until the concrete is hydrated and cured before you can apply the concrete pond sealer, you also need to make sure that you don’t apply it on days that are cold, rainy, or damp. If you apply the sealer when it is damp, water could get trapped on the layer between the sealant and the concrete, which can make the concrete crack if the temperatures drop too low.

It’s a DIY project you can do, but make sure youfollow the instructions and be as patient as you can be with the sealer.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *