Skip to content
Enjoy 10% Off On Your First Order! Use coupon code: DEAL10

From the community

Search the many questions asked by our community over the years or ask a question and receive an emailed answer from our tech support team!

Ask a question

Application 1 answer

Could this be used in a pool made from epdm material?

Answered by PondPro support

Hi, for sure Here is a video a customer sent in an identical application. https://web.archive.org/web/20250216112834/https://www.pondpro2000.com/video.php#all-clip-pondpro

Application 1 answer

I want to use pond pro to cover all pieces of my concrete fountain. I don’t want a black fountain. Can I paint over Pondpro2000?

Answered by PondPro support

Hi, Yes, there is an option if you do not want a black finish on your concrete fountain. For a concrete fountain, we recommend using the appropriate PondPro 2000 system for concrete. Once the PondPro 2000 Concrete coating has fully dried for 7 days, it can be painted over with a good quality latex paint Thank you, PondPro 2000 Support

Application 1 answer

If epdm pond liner is still tacky 24 hours after flash coat, can you put a polyethylene sheet over it and start applying final coat?

Answered by PondPro support

Hi, We would not recommend placing a polyethylene sheet over the flash coat or applying the final coat while the flash coat is still tacky. For an existing EPDM pond liner, the flash coat should be allowed to dry completely before applying the final/main coat. If it is still tacky after 24 hours, please give it additional drying time. Cooler temperatures can significantly extend the drying period. The final coat should be applied directly over the properly dried flash coat. If possible, please let us know the approximate daytime and nighttime temperatures where the pond is located. If the flash coat remains tacky after additional drying time, we can help you determine the best next step before applying the final coat. Thank you, PondPro 2000 Support

Application Verified customer 1 answer

will PondPro2000 adhere to polyethylene seam tape

Answered by PondPro support

Hi, Thank you for contacting PondPro 2000. PondPro 2000 is designed to work very well with our recommended butyl seam tape / TP4X50 seam tape, which is specifically compatible with PondPro 2000 and is commonly used for seams, cracks, tears, and penetrations. For a generic polyethylene seam tape, we would recommend some caution. Polyethylene-based surfaces can vary significantly depending on the tape manufacturer, surface treatment, and adhesive system, so we cannot guarantee adhesion without knowing the exact tape being used. For the most reliable result, we recommend using our compatible PondPro seam tape or butyl tape. The surface should always be clean, completely dry, and free of oil, wax, silicone, or other contaminants before applying PondPro 2000. If you can send us the brand/model of the polyethylene seam tape or a photo of the product, we will be happy to review it and advise you further. Best regards, PondPro 2000 Team

Application Verified customer 1 answer

does it hurt fish

Answered by PondPro support

Hello Greg no once the product fully cures it is safe for any type of fish or plant life thank you

Application Verified customer 1 answer

can i go over PCV liner

Answered by PondPro support

Hello, actually,y the only two surfaces the product can not be applied to are silicone and PVC thank you

Application Verified customer 1 answer

Can I use Pond Pro 2000 for fountain leak repair?

Answered by PondPro support

Yes. Pond Pro 2000 can be used to repair leaks in fountains, including certain concrete, EPDM-lined, fiberglass, and similar water-holding surfaces. Pond Pro specifically states that the coating works on non-porous concrete fountains, and its guidance also discusses fountain repairs.

Application Verified customer 1 answer

Can I coat over an EPDM liner that has already failed?

Answered by PondPro support

Yes. It goes on in one coat with no primer, straight over a failed third-party coating. On EPDM put a light flash coat down first and leave it 24 hours, then apply the main coat. It also works on concrete, fiberglass, acrylic, weathered vinyl, TPO, pools, fountains and concrete tanks.

22 people found this helpful Share this answer

Your turn

Ask your own question

Ask the pond pros

JPG or PNG, up to 5 MB

Your email is never shown on the page and is used only to send you the answer.

Still not sure what your pond needs? Just give us a call

Post your question above, or call us.