Unusual surface or a big commercial job?
Send a photo and we will confirm PondPro will hold before you order.
Cold-weather note
Read cold-weather guidelinesGallon Mixer
Before you choose a size
How Much Do You Actually Need?
Coverage Calculator
EPDM liners need a flash coat first
A very light first pass, 24 hours to dry, then the main coat. The quantity below already allows for both.
Your result
Surface area to coat
0 sq ft
- Floor
- 0 sq ft
- Walls
- 0 sq ft
- Perimeter
- 0 ft
Enter your pond's length, width, and average depth, and the calculator will automatically determine the quantity you need, the most cost-effective way to purchase it, and your total cost.
At 40 sq ft per gallon you need
0 gallons
Rounded up to whole gallons so you do not run short.
Cheapest way to buy it
Product overview
Butyl Rubber That Chemically Bonds To Your Pond.
PondPro 2000 is built on a flexible butyl which is solvent based, allowing for significantly higher elongation and tensile strength than other pond products. As it cures the product will literally chemically cross link and bond to the surface it is applied over.
That is why it goes over existing EPDM liners, fiberglass, vinyl, concrete and any third-party coating that has already failed, without stripping anything back and without the need for a primer. It just cannot be applied over silicone or PVC. A thirty-year history of success has made it the choice of thousands of pond owners.
- 3× longer
- Than acrylics, urethanes and other elastomers
- 20 yrs
- Added to the life of your existing pond
- 4 hours
- To waterproof above 55°F
- 5 yr shelf-life
- From the date of purchase
Watch first
See a full pond sealed start to finish
Two minutes of real application, not a product advert.
Play VideoCompatible surfaces
Will It Work On My Pond?
No primer is required on any of the surfaces below. Not sure of your pond type? Just give our office a call. We are here to help.
-
Existing EPDM liner
Flash coat first, then the main coat
-
Concrete
Hairline cracks and porous patches in one coat
-
Fiberglass & acrylic
Also weathered vinyl and preformed shells
-
A coating that failed
Can be applied to any 3rd party coating except silicone.
Also proven on TPO, pools, reflecting fountains, non-porous brick and mortar, and concrete storage tanks.
Ask about your application to Questions? Call UsThe application process
How To Apply PondPro 2000
No technical background required. We have designed our chemical system to be easily applied by any homeowner or contractor.
-
01
Drain, Clean and Dry
Remove debris and algae. The surface must be clean and dry. No primer, no etching, no special prep beyond that.
-
02
Mix, then roll one coat
Mix thoroughly with the gallon mixer. Roll or brush at 40 sq ft per gallon. EPDM liners take a light flash coat first.
-
03
Refill and Stock
Temps 50 and rising. Waterproof in 4 hours, fully dry in 24 hours, and refill in 72 hours.
-
04
Enjoy
Now your pond is protected for years of enjoyment.
Technical data
How You Actually Put It On.
Quick reference
Coverage By Pond Size
At 40 sq ft per gallon| Pond Size | Surface Area | Gallons | Best Way To Buy It |
|---|---|---|---|
| 8 × 6 × 2 ft | 104 sq ft | 3 | 3 × 1 gallon |
| 12 × 8 × 3 ft | 216 sq ft | 6 | 1 pail + 1 gallon |
| 18 × 12 × 3.5 ft | 426 sq ft | 12 | 2 pails + 2 gallons |
| 25 × 15 × 4 ft | 695 sq ft | 18 | 3 pails + 3 gallons |
Depth is counted on all four walls plus the floor. These are guide figures. The calculator handles irregular shapes and the EPDM flash coat properly.
Working late in the season
Cold Weather Application
PondPro can be applied in temperatures other coatings cannot handle. If you are trying to finish a repair in autumn or early spring, read this before you start rather than waiting until next season.
Cold weather guideDownloads
Technical Data
- Composition
- 100% Butyl Rubber, Liquid
- Coverage Per Gallon
- 40 Sq Ft
- Coats Required
- One
- Primer
- Not Required
- Waterproof After
- 4 Hours
- Dry To Touch
- 4–5 Hours
- Application Temperature
- Above 55°F
- Service Temperature
- –40°F To 250°F
- UV Stability
- Stable, Recoatable
- Colors
- Black
- Shelf Life
- 5 Years From Purchase
- Warranty
- 20 Years
What Customers Said
-
R
Robert K
Arkansas · EPDM liner, 5 gallon pail
The calculator told me six gallons and six gallons is exactly what the job took. I have ordered enough coatings in my life to appreciate not guessing.
-
S
Susan L
Arkansas · EPDM liner, 5 gallon pail
I could never find the leak. Sealing the whole liner was the answer nobody else was offering. Fish went back in the following week with no issues at all.
-
C
Celeste C.
Water fountain · Atlanta, GA · Verified Purchase
Waited years for something like this
I have recently finished my application on my outdoor, pretty large water fountain. What an awesome product. I have been waiting years to find something that actually holds.
-
T
Timothy E.
Garden pond · Hendersonville, NC · Verified Purchase
Turned out great
I saw after I purchased my PondPro materials that if I sent in my before and after pictures I could receive $25 back. Well, here you go. Thank you again, and it turned out great.
-
G
G. Meyers
Artificial pond · Carmel Valley, CA · Verified Purchase
Our fish are thanking you
We had an artificial pond that leaked, and rather than replace the entire lining we were looking for a product we would not have to worry about fixing later. Our fish are thanking you.
-
R
Richard B.
Garden pond · Willard, MO · Verified Purchase
It looks great
Here are the before and after pictures of our pond using your PondPro 2000. It looks great.
-
B
Brandi D.
Atlanta, GA · Pond liner
We have not had any leaks. The water is holding better than it ever has and it looks like a brand new liner. Plants and fish are doing great and we couldn't be more pleased with this product.
-
L
Linda W.
Waterfall pond · Scottsdale, AZ · Verified Purchase
No more loss of water, for the first time
Put Pond Pro 2000 on the liner of our waterfall pond. Works wonderful, no more loss of water for the first time. Our contractor will not use a liner without putting Pond Pro 2000 on it to seal.
-
F
Fred S.
Fish pond · Kirkland, WA · Verified Purchase
Looks like a brand new pond
I just finished repairing my fish pond and am very happy with the result. It went on very easily and looks like a brand new pond. Thanks for the great instructions and phone help.
-
S
Stanley B.
Concrete pond · Rumson, NJ · Verified Purchase
No more leaks
Here are the before and after pictures I promised. Thank you. No more leaks.
-
G
Gail D.
Pond and waterfall · Olmstead, OH · Verified Purchase
100% better than expected
I am so enthusiastic about this product, and am so looking forward to enjoying the pond and waterfall next spring. It turned out 100% better than expected. Thank you for your incredible patience and help with the project.
-
D
Dave Burns
Backyard Getaway · Contractor · Verified Purchase
We were sceptical about one coat
We make it a habit of testing any product first before we apply it to our customers ponds. We were somewhat sceptical about it being a one coat application, as the other products we use require a primer. It did what it said it would.
-
J
Joan R.
Garden pond · Auburn, CA · Verified Purchase
Fish, frogs and plants all fine
Here are before and after pictures of our pond. We used the PondPro in black. We now have a beautiful pond, with blooming plants, mosquito fish, frogs, tadpoles and crayfish.
-
C
C. Thompson
Garden pond · Orlando, FL · Verified Purchase
Simple to coat, even at 72
As a first time user of your product I am so pleased at how simple it was to coat our pond. Adrienne helped me get the seal off the cans and answered a couple of questions. The pond looks amazing, and my children and grandkids are impressed with my results. I am 72.
-
T
Tom H.
Fish pond · Corrales, NM · Verified Purchase
First time in two years the level held
We ordered your PondPro and after waiting a week we filled our pond. This is the first time in over two years the water level did not drop.
Write a review It goes to the office first. Nothing appears here until somebody has read it.
Reviewing Gallon Mixer
Project gallery
Ponds Sealed With This Product
Straight from your phone lines
The Questions Asked Before Every Order.
Still want to talk it through? Seven days a week.
855-788-5836How much product do I need?
One gallon covers roughly 40 square feet. Simply enter your pond's dimensions into the calculator above, and it will automatically calculate the total surface area, gallons required, and most cost-effective package combination.
Do I have to drain the pond first?
Yes. The surface has to be clean and dry before you coat it, so the pond is drained and the liner or shell washed down. Fish go into a holding tank for the day, and back in 72 hours after the coat has fully cured.
Will it stick to a coating that already failed?
Yes. PondPro 2000 chemically bonds with the surface beneath it rather than simply sitting on top, allowing it to be applied directly over most existing coatings — even failed third-party coatings — without stripping or primer. It adheres to virtually all surfaces, with the exception of PVC and silicone.
What if it rains before it dries?
Assuming temperatures are 55°F or higher, PondPro 2000 becomes waterproof in approximately 4 hours and is fully cured within 24 hours. For best results, wait 72 hours before refilling the pond to allow the coating to fully set and perform as intended.
Complete the job
Often Ordered Together
-
Best value
PondPro 2000 5 Gallon Pail
$431.00 View product -
Best for small ponds
PondPro 2000 1 Gallon
$94.25 View product -
Seam Tape 4" x 50' Roll
$92.10 View product -
Butyl Caulk 10 oz Cartridge
$14.90 View product -
Seam Compound Pouch
$43.00 View product -
5-Gallon Pail Mixer
$14.95 View product
Seam Tape 4" x 50' Roll ·Expansion joints, pipe penetrations and cracks
Nobody else in the industry offers it
Do It Once. Do It Right. Then Stop Worrying About Your Pond.
Price is often the first thing people consider. But when you compare the initial cost with the expense and hassle of repeating a cheaper repair every few years, the long-term value becomes clear. PondPro 2000 is an investment in doing the job right the first time.